4 - 32
BAD BOY TRACTOR
PTO OPERATION SWITCH
(1) PTO Operation Switch
CRUISE CONTROL SWITCH
1. When the machine has reached the de-
sired speed, press cruise control switch
to
“ON”. Release the F-R shuttle pedal
and the machine will operate at the se-
lected speed.
2.
When applying full pressure to the Brake
pedals, the cruise control will be deacti-
vated and it will be necessary to reset the
cruise control to the desired speed.
(1) Cruise Control Switch
►[IND]
In the IND position, the PTO shaft ro-
tates constantly regardless of the posi-
tion of the rear implement or connection
status of the clutch.
►[AUTO]
In the AUTO position, the PTO shaft
stops rotation when the rear implement
is lifted to a certain level. The PTO shaft
rotates again as soon as the rear imple-
ment is lowered.
►[AUTO - MEC. MODEL]
When the implement is lifted to the pre-
set height or the clutch pedal is de-
pressed, the PTO shaft is automatically
stopped.
The PTO shaft rotates again as soon
as the rear implement is lowered or the
clutch pedal is released.
►[OFF]
PTO does not rotate. When not work-
ing, put to this position.
※
The engine does not start up, when the
PTO clutch is in “IND” or “LINK”. Put to
“OFF” position for starting up the engine.
[HST]
BBT 5045, 5055(CS,CH,S,H)_US_.indb 32BBT 5045, 5055(CS,CH,S,H)_US_.indb 32 2024-05-09 오전 9:04:092024-05-09 오전 9:04:09
To Next Page
