Baelz Automatic BA 375-E42 - 10. TROUBLESHOOTING; Troubleshooting Steps

30 | 32W. Baelz & Sohn GmbH & Co. · Koepffstrasse 5 · 74076 Heilbronn · Germany · www.baelz.de Seite | Page
Motorized Rotary Actuator baelz 375-E42
9. DECOMMISIONING AND DISPOSAL
Disposeofthedigitalpositionerinaccordancewiththerelevant,country-specicregulations
and laws..
10. TROUBLESHOOTING
If the actuator does not work properly, proceed as follows to correct the problem:
1. Check that the actuator is correctly installed.
2. Checktheactuatorsettingsandthespecicationsonthenameplate.
3. Correcttheproblemsasspeciedinthechecklist(page31).
4. If the problem cannot be corrected, contact the Baelz service department.
5. If, despite consultation, the issue still cannot be resolved, the device can be returned to
Baelz for repair / replacement by arrangement with the service department.
Please give the following information when
contacting the manufacturer or sending the device
in for repair:
● Fnumber(order-relatedserialnumber)
● Type name
● Supply voltage and frequency
● Extrastted
● Error report