USER MANUAL – M625/M325 DRIVE SYSTEM
16
③ M325 (MM G341.500.C)
Chain line(CL): 59.6mm BB length: 68mm
7.2.2 Surface
Shockproof black coating
7.2.3 Cautions
• Storage room humidity: 15-95%RH
• The pedelec should be stored in a ventilated
dry room. Avoid storing the pedelec near
strong magnetic objects.
• Should not be used for a long time overload;
• Should avoid wading to use.
• The motor runs at the rated power for 2
minutes and then stops working for 8 minutes.
According to this working, the motor can be
achieved the heat balance.
The function of the product is impaired by
the presence of any major caustic gas, any
medium that affects the product’s electrical
insulation properties or any high-intensity
magnetic field.
7.3 Maintenance
• Maintenance must be carried out by autho-
rized personnel with the correct equipment.
• Do not disassemble the motor.
• Do not use thinners or other solvents to
clean the components. Such substances can
damage the surfaces.
• Avoid water submerging, to keep the com-
ponents protected.
• Avoid using high-pressure cleaning jets.
• For prolonged storage, turn off the battery
and avoid storing near heat sources.
To Next Page
Loading...
