BAFANG M625 - 8.7.2.5 Error Code

USER MANUAL – M625/M325 DRIVE SYSTEM
26
8.7.2.3 Display Information
Press the
or (<0.5S) button and select
"Display Info", then press the (<0.5S)
button to read the software and hardware
data in the display. To Exit press the
(<0.5S) button, or select “Back” to return to
the “Information” interface.
8.7.2.4 Torque Information
Press the
or (<0.5S) button and select
“Torque info”, then press the (<0.5S)
button to read the software and hardware
data in the display. To Exit press the
(<0.5S) button, or select “Back” to return to
the “Information” interface.
8.7.2.5 Error Code
Press the
or (<0.5S) button and select
“Error Code”, and then press the (<0.5S)
button to confirm. It shows error informa-
tion for the last ten errors of the pedelec.
Error code "00"means that there is no error.
To Exit press the (<0.5S) button, or
select “Back” to return to the “Information”
interface.
8.7.2.6 Warning Code
Press the
or (<0.5S) button and
select “Warning Code”, and then press the
(<0.5S) button to confirm. It shows
information for the last ten warning of the
pedelec. "W-code 0" means that the latest
warning. "00"means that there is no warn-
ing. To Exit press the (<0.5S) button, or
select “Back” to return to the “Information”
interface.