Baldor Flex+DriveII - Specifications; Detailed Technical Specifications for Demonstration Units

Specifications 6-1MN1917
6.1 Introduction
This section provides technical s pecifications for the Flex+Drive
II
demonstration unit.
6.1.1 Specifications
Description FPHDEMO/EN/115 FPHDEMO/EN/230
Input voltage 115VAC 230VAC
Flex+Drive
II
type FPH1A02TB-EN20 FPH2A02TB-EN20
Flex+Drive
II
feedback type Encoder
Motor BSM50N133AE
Dimensions (HxWxD) 368mm x 144mm x 296mm
(14.5in x 5.7in x 11.65in)
Weight 7.7kg (17lb)
Note: These specifications are for new Flex+Drive
II
demonstration units and do not describe upgraded units.
6 Specifications
6