Care2
Installation Instructions
64 Care2 issue 7
3. The properties of the Local Area Connection will be
displayed.
Scroll down until the Internet Protocol (TCP/IP) is entry is
displayed.
Select Internet Protocol (TCP/IP) and then select
Properties.
Figure 5.13 — Local Area Connection Internet Protocol (TCP/IP) Selected
4. The Internet Protocol (TCP/IP) Properties will be
displayed, with the “General” tab showing.
Select the “Alternate Configuration” tab.
Figure 5.14 — Internet Protocol Properties, General Settings Displayed
5. In the Alternative Configuration Tab select “User configured”
and enter the following details:
www.acornfiresecurity.com
www.acornfiresecurity.com
To Next Page
