Balluff BNI EIP-50 105-Z015 Series - Page 47

7．EtherNet/IP Connection Procedure
44
12
Enter EIP002_IN in the Name
Field.
Click Regist.
13
The Edit Tag Set Dialog Box is
displayed again. Click Close.
14
Check that the following tag
set information is displayed on
the In - Consume Tab Page of
the Edit Device Parameters
Dialog Box.
Name: EIP002_IN
Size: 392 Byte
15
Click the Out - Produce Tab in
the Edit Device Parameters
Dialog Box.
Click Edit Tags.
*Follow steps 15 to 21 to
register the output tag set of
Controller (Node 1).