7．EtherNet/IP Connection Procedure
18
The Edit Tag Set Dialog Box is
displayed.
In the same way as steps 10
and 11, individually select all
the variables displayed in the
Candidate Tag List and
register them in the Tag List in
ascending order of OUT No.
listed in 6.3. Tag Sets.
Enter EIP002_OUT in the
Name Field.
Click Regist.
20
The Edit Tag Set Dialog Box is
displayed again. Click Close.
21
Check that the following tag
set information is displayed on
the Out - Produce Tab Page of
the Edit Device Parameters
Dialog Box.
Name: EIP002_OUT
Size: 262 Byte
To Next Page
Loading...
