Balluff BNI EIP-50 105-Z015 Series - Page 51

7．EtherNet/IP Connection Procedure
48
3
The Edit Connection Dialog
Box is displayed. Set the
values listed in the following
table in the Connection I/O
Type, Originator Device and
Target Device Fields.
■Editing settings for connections
Setting item Set value
Connection I/O Type Exclusive Owner
Originator Device Input Tag Set EIP002_IN-[392 Byte]
Connection Type Point to Point connection
Output Tag Set EIP002_OUT-[262 Byte]
Connection Type Point to Point connection
Target Device
Output Tag Set
Input_100-[392 Byte]
Input Tag Set Output_101-[262 Byte]
4
Click Regist.
5
The Edit Connection Dialog
Box is displayed again.
Click
Close
.