1.13 GenICam and advanced features 77
1.13.7 Color Transformation Control
The "Color Transformation Control" contains features like
Feature name (acc. to SFNC
(p. 121))
Property name (acc. to mvIMPACT
Acquire (p. 119))
Description
ColorTransformationSelector colorTransformationEnable Activates the selected color trans-
formation module.
ColorTransformationSelector colorTransformationSelector Selects which color transformation
module is controlled by the various
color transformation features.
ColorTransformationValue colorTransformationValue Represents the value of the se-
lected Gain factor or Offset inside
the transformation matrix.
ColorTransformationValueSelector colorTransformationValueSelector Selects the gain factor or Offset
of the Transformation matrix to ac-
cess in the selected color transfor-
mation module.
related to the control of the color transformation.
This control offers an enhanced color processing for optimum color fidelity using a color correction matrix (CCM)
and enables
• 9 coefficients values (Gain
00
.. Gain
22
) and
• 3 offset values (Offset
0
.. Offset
2
)
to be entered for RGB
IN
-> RGB
OUT
transformation. This can be used to optimize specific colors or specific color
temperatures.
Figure 4: Color correction sample
Coefficients will be made available for sensor models and special requirements on demand.
See also
Optimizing the color/luminance fidelity of the camera (p. 138)
MATRIX VISION GmbH
To Next Page
Loading...
