Balluff MATRIX VISION mvBlueNAOS - MV Serial Interface Control; MV Auto Feature Control

84
1.13.15 mv Serial Interface Control
The "mv Serial Interface Control" contains features like
Feature name (acc. to SFNC
(p. 121))
Property name (acc. to mvIMPACT
Acquire (p. 119))
Description
mvSerialInterfaceMode States the interface mode of the se-
rial interface.
mvSerialInterfaceEnable Controls whether the serial inter-
face is enabled or not.
mvSerialInterfaceBaudRate Serial interface clock frequency.
mvSerialInterfaceASCIIBuffer Buffer for exchanging ASCII data
over serial interface.
mvSerialInterfaceWrite Command to write data from the
serial interface.
mvSerialInterfaceRead Command to read data from the se-
rial interface.
etc.
related to control the devices Serial Interface Control parameters. It enables the camera to be controlled via serial
interface.
The use case Working With The Serial Interface (mv Serial Interface Control) (p. 200) shows how you can work
with the serial interface control.
See also
Working With The Serial Interface (mv Serial Interface Control) (p. 200)
1.13.16 mv Auto Feature Control
The "mv Auto Feature Control" contains features like
Feature name (acc. to SFNC
(p. 121))
Property name (acc. to mvIMPACT
Acquire (p. 119))
Description
mvAutoFeatureAOIMode Common AutoControl AOI used
for Auto Gain Control(AGC), Auto
Exposure Control(AEC) and Auto
White Balancing.
mvAutoFeatureSensitivity The controllers sensitivity of bright-
ness deviations. This parameter in-
fluences the gain as well as the ex-
posure controller.
mvAutoFeatureCharacteristic Selects the prioritization between
Auto Exposure Control(AEC) and
Auto Gain Control(AGC) controller.
mvAutoFeatureBrightness←-
Tolerance
The error input hysteresis width of
the controller. If the brightness er-
ror exceeds the half of the value
in positive or negative direction,
the controller restarts to control the
brightness.
MATRIX VISION GmbH