General
The equipment, the accessories and the preparations are to be used in accordance with the user
instructions and/or the product information.
The instructions are part of the scope of delivery and should be stored in the vicinity of the
device for later reference. This also applies if possession of the device is transferred elsewhere.
Before the device is put into operation, these instructions are to be read carefully and completely
in order for the user to become familiarised with all functions.
The warnings and safety precautions (chapter 1.5) are always to be heeded during use.
The manufacturer will not assume any responsibility for the device's safety or functional ability
in the event of improper handling or usage contrary to the intended purpose. In the event of
unauthorised alterations/modifi cations, both the warranty claim and the CE conformity will no
longer be valid.
If Service is required, please contact the specialist dealer in charge or the manufacturer.
Symbols used:
Symbol Signifi cance Explanation
Danger
Identifi es information that could signify a risk to life and limb,
especially through electric shock, if not observed.
Caution
Identifi es information that must be observed and adhered to
without fail in order to avoid damage to the device and user.
When device parts are labelled with this symbol, the
documentation must be referred to.
Warning Warning of hot surface.
Important Identifi es information that is important for execution.
Note Identifi es information provided for explanatory purposes.
In vitro diagnostics
information
Identifi es information that is important for in vitro diagnostics
applications.
Medical note Identifi es information that is important for medical use.
Do not grip inside For health reasons, touching the oscillating fl uid is prohibited.
Wear ear protectors
For health reasons, spending long periods of time in the
vicinity of the device without ear protectors is prohibited.
Operating sequence
instructions
Identifi es instructions that must be followed in the described
sequence.
3 / 4451436a GB/2017-10
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
To Next Page
Loading...
