7 Accessories
The proper accessories facilitate use of the ultrasound and also protect the device and materials
used at the same time.
BANDELIN offers a broad range of accessories, see appendix.
Additional information may be obtained from our supplier, our sales representative or from our
website.
No-obligation telephone consultation: Website:
+49-(0)-30 – 768 80 – 0 www.bandelin.com
7.1 Required accessories
Stand
Stands are used for correct, variable positioning of the ultrasonic transducer.
Only ultrasonic transducers, and not oscillating elements such as standard or
booster horns with probes, may be affi xed to the special clamp.
Sound proof box
The sonication of liquids generates noise. The sound proof box dampens
the sound emissions by up to approximately 20 dB-AU.
The ultrasonic transducer is inserted into the supporting ring from above
and locked in place if needed.
In order to mount / dismount standard horns, booster horns, or probes,
only use the spanner provided in appendix B.
7.2 Optional accessories
The following standard or booster horns can be connected to the ultrasonic transducer:
Homogeniser HD 2070 HD 2200
Ultrasonic transducer UW 2070 UW 2200
Scope of delivery, standard
and/or booster horn
Standard horn
SH 70 G
Booster horn
SH 213 G
Special accessories
(must be ordered separately)
Diamond probe horn
DH 13 G
Flow-through standard horn
FZ 5 G
Booster horns
SH 219 G
SH 225 G
Diamond probe horn
DH 13 G
Flow-through booster horn
FZ 7 G
Connection options for homogenisers HD 2070 and HD 2200 are presented in appendix A.
33 / 4451436a GB/2017-10
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
To Next Page
Loading...
