Banner EZ-SCREEN LPM Series - Standard Emitter and Receiver Models-25 MM Resolution

Integral RD models require mating cordsets with a removable disconnect connector such as RDLP-8..D (Emitters) or
RDLP-11..E (Receivers).
Defined Area Models Response Time # Beams
Emitter Receiver Pair
2
410 mm
SLPE14-410P8 SLPMR14-410P12 SLPMP14-410P128
13.5 ms 41
SLPE14-410 SLPMR14-410 SLPMP14-410
550 mm
SLPE14-550P8 SLPMR14-550P12 SLPMP14-550P128
16.5 ms 55
SLPE14-550 SLPMR14-550 SLPMP14-550
690 mm
SLPE14-690P8 SLPMR14-690P12 SLPMP14-690P128
19.5 ms 69
SLPE14-690 SLPMR14-690 SLPMP14-690
830 mm
SLPE14-830P8 SLPMR14-830P12 SLPMP14-830P128
22.5 ms 83
SLPE14-830 SLPMR14-830 SLPMP14-830
970 mm
SLPE14-970P8 SLPMR14-970P12 SLPMP14-970P128
25.5 ms 97
SLPE14-970 SLPMR14-970 SLPMP14-970
1110 mm
SLPE14-1110P8 SLPMR14-1110P12 SLPMP14-1110P128
28.5 ms 111
SLPE14-1110 SLPMR14-1110 SLPMP14-1110
1250 mm
SLPE14-1250P8 SLPMR14-1250P12 SLPMP14-1250P128
31.5 ms 125
SLPE14-1250 SLPMR14-1250 SLPMP14-1250
1390 mm *
SLPE14-1390P8 SLPMR14-1390P12 SLPMP14-1390P128
34.5 ms 139
SLPE14-1390 SLPMR14-1390 SLPMP14-1390
1530 mm *
SLPE14-1530P8 SLPMR14-1530P12 SLPMP14-1530P128
37.5 ms 153
SLPE14-1530 SLPMR14-1530 SLPMP14-1530
1670 mm *
SLPE14-1670P8 SLPMR14-1670P12 SLPMP14-1670P128
40.5 ms 167
SLPE14-1670 SLPMR14-1670 SLPMP14-1670
1810 mm *
SLPE14-1810P8 SLPMR14-1810P12 SLPMP14-1810P128
43.5 ms 181
SLPE14-1810 SLPMR14-1810 SLPMP14-1810
* Lengths longer than 1250 mm are no longer available.
3.5 Standard Emitter and Receiver Models—25 mm
Resolution
Pigtail QD Emitter models require mating cordsets with an 8-pin M12/Euro-style connector such as QDE-8..D.
Pigtail QD Receiver models require mating cordsets with a 12-pin M12/Euro-style connector such as QDE-12..D.
Integral RD models require mating cordsets with a removable disconnect connector such as RDLP-8..D (Emitters) or
RDLP-11..E (Receivers).
2
A pair includes an emitter and a receiver
EZ-SCREEN Low-Profile System with Integral Muting
12 www.bannerengineering.com - Tel: + 1 888 373 6767