Defined Area
Models
Response
Time # BeamsEmitter Receiver Pair
3
410 mm
SLPE25-410P8 SLPMR25-410P12 SLPMP25-410P128
9.5 ms 21
SLPE25-410 SLPMR25-410 SLPMP25-410
550 mm
SLPE25-550P8 SLPMR25-550P12 SLPMP25-550P128
11 ms 28
SLPE25-550 SLPMR25-550 SLPMP25-550
690 mm
SLPE25-690P8 SLPMR25-690P12 SLPMP25-690P128
12.5 ms 35
SLPE25-690 SLPMR25-690 SLPMP25-690
830 mm
SLPE25-830P8 SLPMR25-830P12 SLPMP25-830P128
14 ms 42
SLPE25-830 SLPMR25-830 SLPMP25-830
970 mm
SLPE25-970P8 SLPMR25-970P12 SLPMP25-970P128
15.5 ms 49
SLPE25-970 SLPMR25-970 SLPMP25-970
1110 mm
SLPE25-1110P8 SLPMR25-1110P12 SLPMP25-1110P128
17 ms 56
SLPE25-1110 SLPMR25-1110 SLPMP25-1110
1250 mm
SLPE25-1250P8 SLPMR25-1250P12 SLPMP25-1250P128
18.5 ms 63
SLPE25-1250 SLPMR25-1250 SLPMP25-1250
1390 mm *
SLPE25-1390P8 SLPMR25-1390P12 SLPMP25-1390P128
20 ms 70
SLPE25-1390 SLPMR25-1390 SLPMP25-1390
1530 mm *
SLPE25-1530P8 SLPMR25-1530P12 SLPMP25-1530P128
21 ms 77
SLPE25-1530 SLPMR25-1530 SLPMP25-1530
1670 mm *
SLPE25-1670P8 SLPMR25-1670P12 SLPMP25-1670P128
22.5 ms 84
SLPE25-1670 SLPMR25-1670 SLPMP25-1670
1810 mm *
SLPE25-1810P8 SLPMR25-1810P12 SLPMP25-1810P128
24 ms 91
SLPE25-1810 SLPMR25-1810 SLPMP25-1810
* Lengths longer than 1250 mm are no longer available.
3.6 Operating Features
The EZ-SCREEN Low-Profile System with Integral Muting models feature these standard functions.
• Integrated Muting—
Muting Functions
(p. 53)
• Reduced Resolution (Floating Blanking)—
Reduced
Resolution (Floating Blanking)
(p. 39)
• Trip or Latch Output—
Selectable Trip/Latch
Outputs
(p. 68)
• External Device Monitoring (EDM)—
External Device
Monitoring
(p. 45)
• Auxiliary Output; OSSD Follow or Fault—
Auxiliary
(OSSD Follow/Fault) Output
(p. 45)
• Scan Code setting—
Scan Code Configuration
(p.
69)
• Fixed Blanking—
Fixed Blanking
(p. 40)
• Emitter Test and Fault functions
• Inverted Display—
Inverted Display
(p. 69)
• Eight different standard muting configuration options
•
Mute Lamp Monitoring—
Mute Lamp Output
(p.
63)
• Override and Bypass—
Bypass and Mute-
Dependent Override
(p. 65)
• Mute Enable—
Mute Enable (ME)
(p. 61)
These functions are configured via DIP switches (behind the access door on the front of each sensor) and/or the sensor
wiring
configuration. The sensing resolution is determined by the emitter and receiver model.
3
A pair includes an emitter and a receiver
EZ-SCREEN Low-Profile System with Integral Muting
www.bannerengineering.com - Tel: + 1 888 373 6767 13
To Next Page
Loading...