Banner EZ-SCREEN LPM Series - 13 Accessories; Cordsets; Connection Options; M12;Euro QD to Flying Leads and RDLP to Flying Leads Cordsets

13 Accessories
13.1 Cordsets
Machine interface cordsets provide power to the emitter/receiver pair. Cordsets have yellow PVC cables and black
overmolds.
A removable disconnect (RD) fitting is required to connect directly to the sensor housing. QD
fittings are used for cable-to-
cable interconnections and connections to other devices.
13.1.1 Connection Options
Models SLP...-...P8, -...P12
300 mm 8-pin M12/Euro Pigtail QD(Emitters)
300 mm 12-pin M12/Euro Pigtail QD (Receivers)
Requires M12/Euro QD cordset: QDE, DEE2R, or CSM.
Models SLP...-..
Removable Disconnect (RD)
Requires RDLP or DELPE.
13.1.2 M12/Euro QD to Flying Leads and RDLP to Flying Leads
Cordsets
M12/Euro QD connector on one end; unterminated (cut to length) on the other to interface with guarded machine. PVC-
jacketed overmold and cables.
Table 7: Emitter Cables
Model Length Banner Cordset Pinout/Color Code M12/Euro Connector (female face view)
RDLP-815D
QDE-815D
4.5 m (15 ft)
QD pin Color Function
1 Brown +24 V dc
2 Or/Bk Fault
3 Orange N.C.
4 White N.C.
5 Black N.C.
6 Blue 0 V dc
7 Gn/Ye Gnd/Chassis
8 Violet Reset/Test
5
4
3
2
8
1
7
6
RDLP-825D
QDE-825D
7.6 m (25 ft)
RDLP-850D
QDE-850D
15.2 m (50 ft)
RDLP-875D
QDE-875D
22.8 m (75 ft)
RDLP-8100D
QDE-8100D
30.4 m (100 ft)
EZ-SCREEN Low-Profile System with Integral Muting
82 www.bannerengineering.com - Tel: + 1 888 373 6767