Banner EZ-SCREEN LPM Series - Sc22-3

6.5.4 SC22-3
RD (#8) AUX/FAULT
+24Vdc
0Vdc
BN* (Pin#2) +24V dc
GN/YE (#3) GND/PE
BU (#7) 0V dc
BK (#11) OSSD1
WH (#1) OSSD2
VI (#12) RESET/OR1
**
OR (#9) EDM **
PK (#6)
OR2/ME **
Y E (#4) M1
GY (#5) M2
not connected
not connected
SC22-3
Safety Controller
Figure 28. Generic hookup - Self-checking safety module, Safety Controller, safety PLC (no EDM, auto rest, no Override)
Note: * Color code reflects RDLP-11..E and DELPE-12..E cordsets and pin out. Pin #10 on M12/Euro-
style QD not used. See
Cordsets (p. 82) for further cordset information.
** For Trip (auto reset) operation VI (#12) is not connected. No EDM monitoring and no Override (bypass),
OR (#9) and PK (#6) must be connected to +24 V dc.
EZ-SCREEN Low-Profile System with Integral Muting
www.bannerengineering.com - Tel: + 1 888 373 6767 49