13.9 SSM Series Corner Mirrors
• Robust for heavy-duty applications
•
Extra wide for use with long-range optical safety systems
• Rear-surface glass mirrors are rated at 85%
efficiency. The total sensing range decreases by approximately 8% per
mirror. See mirror datasheet p/n
61934
or
www.bannerengineering.com
for further information.
• To order the stainless steel reflective surface models, add the suffix -S (for example, SSM-375-S); range reduction
for these models is approximately 30% per mirror. See datasheet p/n
67200
.
• Robust construction, two mounting brackets and hardware included.
• EZA-MBK-2 adapter bracket is required for use with MSA Series stand, refer to the mounting bracket accessories
list.
• Brackets may be inverted from the positions shown, decreasing dimension L1 by 58 mm (2.3 in).
Mirror Model Defined Area Length Reflective Area Y Mounting 1 Mounting L2
SSM-200 150 mm (5.9 in) 200 mm (7.9 in) 278 mm (10.9 in) 311 mm (12.2 in)
L1
L3
L2
Y
101.2 mm
(3.98")
100 mm
(3.94")
115 mm
(4.53")
M6 x 19 mm
screw
(4 supplied)
M5 x 10 mm
screw
(4 supplied)
SSM-375 300 mm (11.8 in) 375 mm (14.8 in) 486 mm (19.1 in) 453 mm (17.8 in)
SSM-550 450 mm (17.7 in) 550 mm (21.7 in) 661 mm (26.0 in) 628 mm (24.7 in)
SSM-675 600 mm (23.6 in) 675 mm (26.6 in) 786 mm (31.0 in) 753 mm (29.6 in)
SSM-825 750 mm (29.5 in) 825 mm (32.5 in) 936 mm (36.9 in) 903 mm (35.6 in)
SSM-975 900 mm (35.4 in) 975 mm (38.4 in) 1086 mm (42.8 in) 1053 mm (41.5 in)
SSM-1100 1050 mm (41.3 in) 1100 mm (43.3 in) 1211 mm (47.7 in) 1178 mm (46.4 in)
SSM-1275 1200 mm (47.2 in) 1275 mm (50.2 in) 1386 mm (54.6 in) 1353 mm (53.3 in)
SSM-1400 1350 mm (53.1 in) 1400 mm (55.1 in) 1511 mm (59.5 in) 1478 mm (58.2 in)
SSM-1550 1500 mm (59.0 in) 1550 mm (61.0 in) 1661 mm (65.4 in) 1628 mm (64.1 in)
SSM-1750 1650 mm (65.0 in) 1750 mm (68.9 in) 1861 mm (73.3 in) 1828 mm (72.0 in)
SSM-1900 1800 mm (70.9 in) 1900 mm (74.8 in) 2011 mm (79.2 in) 1978 mm (77.9 in)
Not all mirror lengths are available with all EZ-SCREEN models.
13.10 Accessory Mounting Brackets
Contact Banner Engineering for more information. Order one LPA-MBK-.. bracket per sensor, two per pair.
Model Description
LPA-MBK-10
• End-mount bracket
•
14 ga (1.9 mm) steel, black zinc plated
• Includes two brackets and hardware
LPA-MBK-13
• Adaptor for side-mount bracket LPA-MBK-12
•
Reorients sensor rotation by 90° (+10°/ −30°)
• 14 ga (1.9 mm) steel, black zinc plated
• Includes 1 bracket and hardware
EZ-SCREEN Low-Profile System with Integral Muting
92 www.bannerengineering.com - Tel: + 1 888 373 6767
To Next Page
Loading...