EasyManuals Logo

Banner Q5X Quick Start Guide

Banner Q5X
16 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
Original Instructions
July 25, 2023
p/n: 208795 Rev.H
208795
Q5X with Dual Discrete Outputs and IO-
LinkQuickStartGuide
Product Description for the Q5X Dual Discrete
ThisguideisdesignedtohelpyousetupandinstalltheQ5X Laser Measurement Sensor.Forcompleteinformationonprogramming,perfor
mance,troubleshooting,dimensions,andaccessories,pleaserefertotheInstructionManualatwww.bannerengineering.com. Search for p/
n208794toviewtheInstructionManual.Useofthisdocumentassumesfamiliaritywithpertinentindustrystandardsandpractices.
WARNING:
Do not use this device for personnel protection
Using this device for personnel protection could result in serious injury or death.
Thisdevicedoesnotincludetheselfcheckingredundantcircuitrynecessarytoallowitsuseinpersonnelsafe
ty applications. A device failure or malfunction can cause either an energized (on) or de-energized (off) output
condition.
Features
TheQ5X Laser Measurement Sensorhasthreemajorfeatures.
Q5XFeatures
1
2
3
Display and Indicators
Thedisplayisa4digit,7segmentLED.Runmodeistheprimaryviewdisplayed.
For 2-pt, BGS, FGS, and DYN TEACH modes, the display shows the current distance to the target in centimeters. For Dual TEACH mode,
thedisplayshowsthepercentagematchedtothetaughtreferencesurface.Adisplayvalueof999Pindicatesthesensorhasnotbeen
taught.
DisplayinRunMode
STB DYN FGS BGS
1
2
Output Indicator
On: The output is on
Off: The output is off
Stability Indicator (STB)
On—Stablesignalwithinthespecifiedsensingrange
Flashing—Marginalsignal(lowexcessgain),thetargetisout
side the limits of the specified sensing range, or a multiple
peak condition exists
Off—Notargetisdetectedwithinthespecifiedsensingrange
Active TEACH Indicators (DYN, FGS, and BGS)
DYN,FGS,andBGSalloff—TwopointTEACHmodeselect
ed (default)
DYNon—DynamicTEACHmodeselected
FGSon—ForegroundsuppressionTEACHmodeselected
BGSon—BackgroundsuppressionTEACHmodeselected
DYN,FGS,andBGSallon—DualTEACHmodeselected
Twooutputindicators(amber)
1.
Display
2.
Buttons
3.
StabilityIndicator(STB—Green)
1.
Active TEACH Indicators
DYN—Dynamic(Amber)
FGS—ForegroundSuppression(Amber)
BGS—BackgroundSuppression(Amber)
2.
© Banner Engineering Corp.

Other manuals for Banner Q5X

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Banner Q5X and is the answer not in the manual?

Banner Q5X Specifications

General IconGeneral
BrandBanner
ModelQ5X
CategorySecurity Sensors
LanguageEnglish

Related product manuals