Banner SX5 - Wiring Diagrams

Signal Function Connection
Muting Lamp
0 V
OSSD OSSD 1/1 OSSD 1/2
0V
PNP
4.3.7 Wiring Diagrams
Wiring with FSD Inputs
+24V dc 0V dc
OSSD1
OSSD2
n.c.
n.c.
Reset / Restart
FSD2
FSD1
Single-Channel
Safety Stop
Circuit
Dual-Channel
Safety Stop
Circuit
NOTE: Do not exceed OSSD maximum load
capacitance
specification.
2 - Brown
8 - Red
7 - Blue
5 - Grey
6 - Pink
3 - Green *
1 - White *
4 - Yellow *
+24 V dc
Functional Earth
0V dc
Scanner
8-pin Male
Euro-style
face view
* Functionality of pins 1, 3, and 4
is configured with the GUI
Note: This wiring diagram shows
pin 1 configured as a reset/restart.
Figure 37. Wiring with FSD inputs
Monitoring FSDs—FSDs must be monitored for proper operation. One-channel EDM can only be used when the scanner is
configured for manual reset.
SX5 Safety Laser Scanner
46 www.bannerengineering.com - Tel: +1.763.544.3164