Baofeng DM-1701 - Page 7

[*]button
Press and hold this button to lock on / off keyboard
Code word * in DTMF function
[#]button
Switch the input method in input method interface.
Code word # in DTMF function
■ Programmable Buttons
In order to improve the operational convenience, the function shortcut keys provided by this product are 【SK1】 key, 【SK2】 key,
【SK3】 key, 【P1】 key and 【P2】 key. For the specific function, please consult the distributor. For the detailed description of each
function, please refer to the corresponding contents of "Function and Operation".
No.
Shortcut name
Purpose
1
None
No function is assigned to the preset button.
2
All prompt tone
on/off
Quickly enable or disable all prompt tones at the same time.
3
Emergency mode
on
Quickly establish an emergency call. This is the recommended option for the orange button.
4
Emergency mode
off
Quickly end an emergency call initiated outward.
5
Select high/low
power
Quickly switch between high power and low power.
6
Monitor
Quickly turn on or off the monitor function.
7
Push to talk 1
Quickly make digital group calls, digital single call, call prompts, or send text messages (only for digital mode) via
push to talk. (This option is only available if the digital function is enabled on the device.) Push-to-talk 1 to
push-to-talk 6 can be set.
8
Relay / offline
Quickly switch between relay mode and offline mode.
9
Scan on / off
Quickly turn the scan function on or off. Note: double-segment double-waiting scan does not work
10
Strict/normal
squelch
Quickly switch between strict squelch and normal squelch (only for analog mode).
11
Encryption on/off
Quickly turn on/off encryption for channel (only for digital mode).
12
Voice control on/off
Quickly turn on or off the voice control function.
13
Area switching
Quickly select the area, allowing the user to switch between two areas.
14
Battery power
indication
Quickly access to battery power. The user can check the battery status by LED. The battery power is sufficient if
the LED is constantly in green, the battery power is still available if the LED is constantly in yellow, and the battery
power is low if the LED is in red.
15
Individual
operation switch
Quickly turn on or off individual operation function.
16
Recording switch
(Based on firmware) to quickly turn on/off the recording
17
Record playback
(Based on firmware) to quickly playback of recordings
18
Delete all the
recordings
(Based on firmware) to quickly delete all recordings
19
1750Hz
Fast launch 1750 pilot signal
20
Up and down
screen switch
Quickly switch the upper and lower screen
21
Left key
22
Right key
Note:
●The same button short press and long press can achieve different functions, specific by the dealer settings.
2. Security and overview