71R5900103 /02 C-10, C-5
6.1 Accessing the Configurator
Getting access to the Configurator
There are three ways to access the Configurator:
• Via the LAN
• Direct Ethernet connection between PC and Base Unit.
• Via the Base Unit's wireless network
When accessing the configurator for the first time, the ClickShare Configuration Wizard starts automatically.
This configuration wizard can be started at any moment to change your configuration instead of using the
menus.
To access the Configurator via the LAN
1. Open a browser.
Note: Supported browsers are Microsoft Edge, Firefox, Google Chrome and Safari.
2. Browse to the IP address of your device.
Note: If you do not know the IP address due to Show network info is disabled, connect via a
direct connection or via a wireless connection to your device to discover the wired IP address.
A login screen appears.
Image 6–1 Login screen
3. To change the language of the Configurator, click on the drop down next to the current selected language
and select the desired language.
C-10, C-5 Configurator
To Next Page
Loading...
Need help?
General
