R5900103 /02 C-10, C-576
For more information about a specific topic, see one of the following topics.
The ClickShare Configuration Wizard can be started at any time to change the configuration just by clicking on
ClickShare Configuration Wizard at the left bottom of each screen or on Lauch configuration wizard on the
start page.
Firmware Firmware update – automatically See “Firmware Update”, page 115
Firmware update – manually
Personalisa-
tion
Language on-screen text See “On-Screen ID information”, page 76.
Meeting room name, location name and
welcome message
See “On-Screen ID information”, page 76.
System Time zone, manual time setup See “Date & Time setup, manually”, page
105.
Use NTP See “Date & Time setup, time server”, page
107.
Security Level settings See “Security, security level”, page 102.
Password ClickShare Configurator password See “Security, passwords”, page 104.
Network Frequency band, channel Wi-Fi passphrase See “Wi-Fi settings, Wireless Client”, page
86.
SmartCare for
ClickShare
Register your device to get the SmartCare
package
See “Registration to XMS Cloud”, page 56.
6.3 On-Screen ID information
About device identification
The following items can be set:
• On-Screen language. Independent from the Configurator language.
• Meeting room name
• Location of the meeting room
• Welcome message to be displayed in the meeting room
• Show the network information
- Checked: LAN information such as wired IP address is displayed. Also the Wi-Fi IP address and SSID
are displayed.
- Not checked: no LAN nor Wi-Fi information is displayed (default setup)
• Enable theater mode
- Checked: the entire screen is used to share content. No status bar displayed anymore. The status bar
pops up to show status changes, notifications, pin code etc. and fades out again. With touch screens a
‘tag’ enables you to bring up the status bar to start annotation and blackboarding.
- Not-checked: Status bar remains on the screen.
C-10, C-5 Configurator
To Next Page
Loading...
