32User Manual - Basic setupCR series
User Manual - Basic setup
5.12 Changing the language of the menu system
The projector menu system has a total of 11 user-selectable languages embedded for easier
use all over the world. The default language is English.
The available languages are:
• English
• French
• German
• Spanish
• Russian
• Norwegian
• Swedish
• Korean
• Japanese
• Chinese Simplified
• Chinese Traditional
• Portuguese
• Italian
To change the language of the menu system, just select “LANGUAGE” from the top menu
and select your desired language.
5.13 Identifying system status
For ease of use, the projector has a complete menu available for system status. It is easily
accessible from the top menu. From this menu the following information can be read:
• Part number
• Serial number
• The year/week the projector was manufactured
• Current software version
• Runtime and remaining time for both lamps
• Total number of operating hours
• All network information
• Current lens mounted
• Currently active source
5.13.1 Getting information about the active source
By selecting STATUS > SOURCE INFORMATION basic information about currently active
source is displayed.
If a deeper analysis is required for the currently active source, select STATUS > SOURCE IN-
FORMATION > ADVANCED. This menu provides detailed timing information for the currently
active source.
5.14 Using the dual lamp system (UHP models only)
The projector is fitted with two individual projection lamps* that can be run in various modes.
To Next Page
Loading...
Need help?
General
