6
1 Introduction
1.1 Thank you
Thank you for purchasing this projector.
When referring to the term CR-series in this document,it means that the content is applicable
for following Barco products:
• CRPN-62B
• CRWQ-62B
The CR series projectors set an industry benchmark for projectors in its size and
performance category. Featuring high resolution DLP technology, high performance optics
and lenses, updated signal processing and built-in frame-lock synchronisation makes it the
ideal projector for multi-channel visualisation and simulation applications, where realism
and reliability are key criteria. In addition the excellent image performance, the 1080p and
WUXGA version are capable of Active Stereo 3D.
1.2 Features
• 1080p (1920x1080), WUXGA (1920 x 1200), panorama (2560x1080) or WQXGA (2560 x
1600) resolution single chip DLP® technology
• Patented Dual Architecture or LED illumination system and optics
• RealColor advanced colour management suite
• Fail safe, hot swap Dual Lamp architecture or longlife LED illumination
• Dual optomechanical IRIS for customizable brightness and contrast
• Full powered horizontal and vertical lens shift, allows direct stacking
• Full 12-bit colour resolution for minimised artefacting and high accuracy
• BrilliantColor™ technology with six-colour processing for accurate colours
• Elevated contrast levels for unmatched image dynamics
• High brightness for large screen applications
• Range of application specific colour wheel options
• Wide range of projection lenses
• Highly versatile colour management and calibration options
• Built-in real time clock for timed operations
• Sigma Designs™ technology video de-interlacing and processing
• Economy mode for reduced power consumption and prolonged lamp life
• Small and ergonomic footprint, with low weight
• Direct view status monitor and lamp function indicators
• Multiple video and graphics inputs for virtually any video and data source
• Dual Link DVI (330 MHz)
• HDMI ver. 1.3a
• LAN and RS232 for control and monitoring