Barco G60 - Page 31

R5910888 /00 G60 31
Digital Horz Shift
Adjust the horizontal position of the display area if it is resized through Digital Horz Zoom setting.
Digital Vert Shift
Adjust the vertical position of the display area if it is resized through Digital Vert Zoom setting.
Ceiling Mount
Flips the image upside down to project from a ceiling mount.
Rear Projection
Reverse the image to project behind a translucent screen.
Geometric Correction
Configure the geometric settings to reshape the image for different projection surface.
Image 4-6
• H. Keystone : Adjust the left and right side of the projected image to make it an even rectangle. It is used
for the images with unequal left and right sides.
Image 4-7
• V. Keystone : Adjust the top and bottom side of the projected image to make it an even rectangle. It is
used for the images with unequal top and bottom sides.
Image 4-8
• 4 - corner : Position the 4 corners of the image to have it fit a specific projection surface.
User controls