Barco G60 - Page 32

R5910888 /00 G6032
B C
D
E
A
H
FG
Image 4-9
• Grid Color : Set the grid color for 4-corner adjustment. The available options are purple or green.
• Reset : Reset geometric settings to factory default values.
• PC Mode : Enable PC mode to use PC software for more complicated geometric configuration.
PIP/PBP
PIP/PBP (picture in picture/picture by picture) mode allows displaying two images from two independent
sources. For more information on the PIP/PBP compatibility, See “Compatibility modes”, page 49.
Image 4-10
• PIP/PBP Enable : Select the appropriate PIP/PBP mode.
- Off : Disable PIP/PBP mode.
- PBP : Display two input sources simultaneously on the left and right sides of the screen.
- PIP : Display one input source on the main screen and the other input source in an inset window.
• Main Source : Select an input source for the main image.
• Sub Source : Select an input source for the second image.
• Layout : Adjust the layout of two images. In the layout chart below, the “P” indicates the main image:
PIP Layout
PIP Size
Small Medium
Large
PIP, Bottom Right
P
P
P
PIP, Bottom Left
P
P
P
User controls