R5910599 /00 MDSC-842716
Image 2-8
The VESA mounting holes at the back of the display are provided with M4-type blind fasteners to fix the VESA
mounting plate. Depending on the VESA plate thickness (T) and the thickness of possible washers (W), a
different screw length (L) should be selected.
Please respect the following rule to select an appropriate screw length:
• L
min
= T + W + 15 mm
• L
max
= T + W + 18 mm
Image 2-9
CAUTION: Use an arm that is in compliance with VESA requirements.
CAUTION: The monitor VESA interface has been designed for a safety factor 6 (to support 6 times
the monitor weight). In the medical system, use an arm with suitable safety factor (IEC60601–1).
Display installation
To Next Page
Loading...
