Barco MDSC-8427 - Save Profile; Front Menu User Keys

R5910599 /00 MDSC-842734
• User 2
• User 3
To recall a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Recall Profile submenu.
4. Select one of the available profiles to recall and confirm.
4.4.5 Save Profile
About saving profiles
The user can modify the default video parameters associated to each profile and save the new parameter
settings under the User 1, User 2 or User 3 profile. The Factory and X Ray profiles can be modified, but the
factory default can’t be overwritten and can always be recalled through the recall profile menu item.
The available profiles to save in your display are:
• User 1
• User 2
• User 3
To save a profile
1. Bring up the OSD main menu.
2. Navigate to the Configuration menu.
3. Enter the Save Profile submenu.
4. Select one of the available profiles to save and confirm.
4.4.6 Front menu user keys
About front menu user keys
The MDSC-8427 has a front menu (see “Front menu ”, page 19) which supports 3 user key functions. These
user keys allow to immediately activate a commonly used function without having to access and browse the
OSD menus. Each user key is customizable and can have any of the following functions associated to it:
• Main source
• Brightness
• Color space
• DVI
• SDI
• HDMI 1
• HDMI 2
• DP
• Gamma
• Flip
• PiP mode
• Profile
When a function is not available for the current display configuration, it will not be visible in the list.
To customize the front menu user keys
1. Bring up the OSD main menu.
2. Navigate to the System menu.
3. Enter the Custom 1/2/3 submenu.
Advanced operation