R5910599 /00 MDSC-8427 15
Image 2-5
CAUTION: The display must be earthed.
Potential equalization
When potential equalization between the display and other devices is required then connect the potential
equalization pin (POAG) to the potential equalization terminal of the equipment.
Image 2-6
2.4 Cable routing
To route the cables
Rote all cables through the cable routing cutout while reinstalling the connector compartment.
Image 2-7
CAUTION: When the display is assembled in the medical system, take care of the fixation of all
cables, to avoid unwanted detachment.
2.5 VESA mount installation
To install the display on a VESA mounting solution
The display can be attached to a VESA 100 mm arm or stand.
Display installation
To Next Page
Loading...
