EasyManua.ls Logo

Barco MDSC-8427 - On;Off Switching; Front Keyboard Locking;Unlocking

Barco MDSC-8427
56 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
R5910599 /00 MDSC-842718
3.1 On/off switching
The procedures below consider that DC power is supplied to the display. Please check the status of
the power mode LED to verify that your display is supplied with DC power (see Power status LED ,
page 19).
To switch on your display
With the front keyboard:
1. Press and hold (3-4 seconds) the
key until the entire front keyboard starts blinking.
2. While the front keyboard is blinking, release the
key again (within 2 seconds, to avoid a keyboard re-
lock) and the display will switch on.
With the rear keyboard:
1. Press and hold (3-4 seconds) the center button until the entire front keyboard starts blinking..
2. While the front keyboard is blinking, release the center button again (within 2 seconds, to avoid a
keyboard re-lock) and the display will switch on.
When the keyboard backlight lights up, the power mode LED will turn full green indicating that the
display is switching on.
To switch off your display
With the front keyboard:
1. Unlock the front keyboard (see Front keyboard locking/unlocking, page 18).
2. With the keyboard unlocked, press and hold (3-4 seconds) the
key until the entire keyboard starts
blinking.
3. While the front keyboard is blinking, release the
key again (within 2 seconds) and the display will switch
off.
With the rear keyboard:
1. Press and hold (3-4 seconds) the center button until the entire front keyboard starts blinking.
2. While the front keyboard is blinking, release the center button again (within 2 seconds) and the display will
switch off.
3.2 Front keyboard locking/unlocking
About
In order to avoid unwanted or accidental activation of the front keyboard, a lock/unlock mechanism has been
implemented. This means that the front keyboard needs to be unlocked before it can be used to change any of
the display settings. By default, all keys except the
key will be dimmed to indicate that the front keyboard is
locked.
After unlocking the front keyboard, all keys will light up. Touching any of these keys while the backlight is on
will execute the function of the key. However, if no further action is taken within the time-out (10 seconds), the
keys will dim again and the keyboard will re-lock.
To unlock the front keyboard
Two options are available to unlock the keyboard:
With the front keyboard:
1. Press and hold (3-4 seconds) the
key until the entire front keyboard starts blinking.
2. While the front keyboard is blinking, release the
key again (within 2 seconds, to avoid a keyboard re-
lock) and the front keyboard will be unlocked. Also the front menu will automatically appear.
With the rear keyboard:
1. Press any key on the rear keyboard and the front keyboard will be unlocked.
Daily operation

Table of Contents

Related product manuals