Barco MDSC-8427 - Page 51

R5910599 /00 MDSC-8427 51
• Green compliance: ROHS-3, REACH, WEEE
Protection level IP21 (IP45 front side only) with a tilt of ± 10°
Warranty 3 years
MDSC-8427 12G
Screen technology TFT AM LCD / IPS-PRO technology / LED backlight
Active screen size
(diagonal)
27” (685 mm)
Active screen size (H x V) 597 x 336 mm
Aspect ratio 16:9
Resolution UHD (3840 x 2160 pixels)
Pixel pitch 0.155 mm
Color support 1 Billion (30 bit color depth)
Color gamut Native: Wide color gamut (Adobe 92%)
Calibrated color space: ITU-709, DCI-P3, BT.2020
Viewing angle 178° Hor / 178° Ver
Luminance Maximum: 750 cd/m² (typical)
@6500K: 550 cd/m² stabilized (typical)
Contrast ratio 1400:1 (Typical)
Response time T
on
+ T
off
= 20 msec (typical)
White point Calibrated: 5600K, 6500K, 7600K, 9300K
Gamma curve Native, 1.8, 2.2, 2.4, Video, DICOM
Front protection screen 2-side anti-reflective glass with anti-fingerprint coating
Keyboard Front: 5-key capacitive touch - user programmable
Rear: 5-key membrane
Video inputs 4K-UHD input:
• 1x DP 1.1 up to 3840 x 2160 @ 30 Hz
• 2x DP 1.1 up to 1920x2160 @ 50/60 Hz
• 1x DP 1.2 MST up to 3840 x 2160 @ 50/60 Hz
• 2x HDMI 2.0 up to 3840 x 2160 @ 50/60 Hz (*)
(*) DP 1.2 SST to HDMI 2.0 adapter available from Barco
• 4K SDI:
- 4x 3G-SDI quad link up to 1920 x 1080 @ 50/60 Hz or, alternatively
- 12G-SDI up to 3840 x 2160 @ 50/60 Hz (2x input)
FHD input (upscaled to 4K):
• 1x DVI
• 1x 3G-SDI
Video outputs • 1x 12G-SDI (SDI-1 input loop through) – No output signals when the
input is 4x 3G-SDI)
• 1x DVI (4K display screen clone - downscaled to 1080i/1080p)
Display features Video processing optimized for low latency and noise reduction, Picture-in-
Picture, Picture-by-Picture, Image Mirror and Rotation, Failover mode,
Important information