Barco PGXG-61B - Dimensions

51
PGXG-61B/PGWX-61B/PGWU-61B - - 2014/02/12
7. Specications
WARNING:
Be sure to use the correct screw size. Screw size will vary depending on the thickness of the mounting y
plate.
Be sure to keep at least 10 cm gap between the ceiling and the bottom of the projector. y
Avoid installing the projector near a heat source. y
364.00
112.68293.00
160.00
95.00
241.20
216.20
155.11
184.79
475.22
6.16
126.07
259.82
Front View Top View Rear View
Left Side View
Bottom View
Right Side View
7.4 Dimensions
Dimensions given in millimeters.
Projector Outer Dimensions