6. ADVANCED OSD MENU
The advanced menu only available for Professional use. Need enter the password to use this function.
Overview
The Advanced menu is the further function to control and align the projector, the following functions can be done:
•
Advanced OSD introduction.
•
Input setup: different Input settings can be adjusted such as specific input slot settings, locking, native resolution and no
signal settings.
•
Image adjustment: these adjustments are organized per image source and contain the aspect ratio, timings and image
settings.
•
Layout adjustment: set up of the main window and the picture in picture window.
•
Lamp: manage the lamp mode, the lamp use, lamp type and history
•
Alignment: groups all controls necessary during the setup of the projector onto a screen.
•
Control: contains the accessibility settings of the projector, such as address and communication setup.
•
Service: contains information about how the projector is performing. This information will be useful when calling for a
service intervention.
6.1 How to activate the Advanced OSD menu
Press the button on the remote control or Home on the Projector Keypad to call the Basic OSD Lite on screen.
Select the “ADVANCED” and press the password then the screen will show the advance OSD as below:
The password for the advanced OSD is
To Next Page
Loading...
Need help?
General
