Barco PJWU-101B

PJWU-101B 17/10/2014
17
3.Physical Installation
3.3 Connecting the projector with the power net
CAUTION: Use only the power cord provided with the projector.
1.
Select correct voltage
2.
Ensure that the power switch stands in the ’0’ (OFF) position .
3.
Connect the female side of the power cord with the power input socket of the projector .
4.
Secure the power plug by locking the plug holder clamp.
Connect to Wall plug

VOLTAGE
交流電源選擇
AC POWER SWITCH
交流電源開關
AC MAINS
交流電源輸入
VOLTAGE
交流電源選擇
AC POWER SWITCH
交流電源開關
AC MAINS
交流電源輸入


