Barco PJWU-101B User Manual

PJWU-101B 17/10/2014
65
14.Lamp and Filter Maintenance
4.
Use a screw driver to loosen the screws as shwon in the illustration.
5.
Pull the lamp out.
6.
Insert the new lamp in the direction shown in the illustration into the lamp assembly; tighten the two screws using a
screw diver and make sure the lamp is firmly secured to prevent the lamp from shaking or poor contact.
7.
Replace the lamp cover and firmly secure the four screws on the lamp cover.

Barco PJWU-101B Specifications

General

Brand	Barco
Model	PJWU-101B
Category	Projector
Language	English