Basler ace User Manual

AW00123401000 Physical Interface
Basler ace USB 3.0 31
5.6 Camera Power
Power must be supplied to the camera via the USB 3.0 cable plugged into the camera’s USB 3.0
Micro-B port.
Power consumption is as shown in the specification tables in Section 1 of this manual.
NOTICE
Voltage outside of the specified range can cause damage.
You must supply camera power that complies with the Universal Serial Bus 3.0 specification.
The camera’s nominal operating voltage is +5 VDC, effective at the camera’s connector.

Basler ace Specifications

General

Sensor Type	CMOS
Lens Mount	C-mount, CS-mount
Interface	GigE, USB 3.0
Dimensions	29 mm x 29 mm x 29 mm (some models vary slightly)
Operating Temperature	0°C to 50°C
Shutter Type	Global shutter, Rolling shutter
Bit Depth	8-bit, 10-bit, 12-bit
Weight	Approx. 100 g (varies by model)