Operating Manual for BAUER LINESTAR 9000 with hose feed 107
25 CONFORMITY CERTIFICATE
EC Declaration of Conformity
according to EC Directive 2006/42/EG
The manufacturer
Röhren- und Pumpenwerk BAUER Gesellschaft m.b.H.
Kowaldstraße 2, 8570 Voitsberg, Austria
Tel: +43 3142 200-0; Fax: +43 3142 200-320/-340
herewith confirms that the machine mentioned below
Designation of machine BAUER LINESTAR 9000
Machine type / basic units LINESTAR 9000 - 168 EL
corresponds analogously to the requirements of the Machinery Directive 2006/42/EG.
In case of modification of the machine not accorded with BAUER GmbH, this declaration will cease to be valid.
The following standards as amended have been applied analogously:
DIN EN ISO 12100-1 Safety of machinery - Basic concepts, general principles for design
Part 1: Basic terminology, methodology
DIN EN ISO 12100-2 Safety of machinery - Basic concepts, general principles for design
Part 2: Technical principles
DIN EN 60204-1 Safety of machinery - Electrical equipment of machines
Part 1: General requirements
EN ISO 14121-1 Safety of machinery - Risk assessment
Part 1: Principles
ÖNORM EN ISO 13857 Safety of machinery - Safety distances to prevent hazard zones being
reached by upper and lower limbs
Standards related to products
DIN EN 909 Agricultural and forestry machinery - Centre pivot and moving lateral
types irrigation machines - Safety
Person in charge of documentation: Thomas Theissl, Kowaldstraße 2, 8570 Voitsberg, Austria,
Technical Designer in Charge Commercial Manager
Voitsberg, 08.05.2012
To Previous Page
Loading...