Bauer LINESTAR 9000 - Service Plan

52
Operating Manual for BAUER LINESTAR 9000 with hose feed
18.2 SERVICE PLAN
Extent of Service
Intermediate maintenance Annual maintenance
Central unit
 Check all screwed joints
X
 Check tightness of electric cable entries into the control centre
X
 Check tightness of connecting hoses in the riser pipe
X X
Trussing, overhang, coupling
 Check all screwing on flanges, truss rods, braces, on towers and on overhang
X
 Check tightness of connecting hose at tower couplings.
X
 Lubricate ball joint of tower couplings
X X
 Empty sand trap
X X
 Booster pump – spinning of shaft between engine and pump – check if pump rotor rotates
freely (if existing)
X
 Check end gun (if existing)
X
Tower box, transmission device
 Check switch cam and adjust if necessary
X
 Check shifting travel of micro switches
X X
 Check function of micro switches (operation switch and safety switch)
X
 Check all electric connections for contact
X
 Check tightness of all cable entries into the alignment control
X
 Check tightness of alignment control covers
X
 Lubricate the ball joints at transmission parts
X X
 Exact control – Check tension of guiding cables
X
 Visual inspection of span alignment
X X
 Check function of switches for intermediate stop, end stop and of programme switch
X