Bauer LINESTAR 9000 - Page 61

Operating Manual for BAUER LINESTAR 9000 with hose feed 53
Extent of Service
Intermediate
maintenance
Annual-
maintenance
 Lubricate cardan joints
X X
 Check easy moving of guiding rollers of cable guidance
X X
 Check distance and parallel moving of central unit with respect to furrow or cable control
X X
 Check straightness of guiding cable or furrow
X X
Drive unit
 Check oil level of wheel gears and drive motors
X
 Change oil after first irrigation season, then every third irrigation season
X
 Wheel gear: Make sure the drainage holes on bearing covers and the vent hole of the
expansion chamber are not clogged
X
 Wheel gear Type TNT – Lubricate shifting device
X X
 Drive motor: Make sure the drainage hole at bottom side of the motor is not clogged.
X
 Wheel gear, drive motor - check tightness of shaft sealing rings
X X
 Lubricate freewheel hubs of towable wheel gears
X
 Check screw connections of driveline couplers
X
 Check if rubber packages of driveline couplers are damaged. Replace worn and broken
rubber packages.
X X
 Check wheel nuts
X X
 Check tire pressure:
 1.5 bar with tires 14.9 – 24
 bar with tires 11.2 – 24
 0.8 bar with tires 16.9 – 24
X X
 Make sure tires are not damaged
X
 Check anti-twist protection of drive shaft cover
X X
Generator unit
 see separate motor manual