Bauer LINESTAR 9000 - Swivelling Central Unit Wheels; Swivelling Tower Wheels; Mounting the Tow Cables on -Wheel Central Unit

62
Operating Manual for BAUER LINESTAR 9000 with hose feed
22.1.1 SWIVELLING CENTRAL UNIT WHEELS
Proceed according to item 17.5
Mounting of tow bar
22.1.2 SWIVELLING TOWER WHEELS
 Loosen and push back the drive shaft cover at wheel gear .
 Loosen driver pin on wheel hub. If wheel gear is provided with shifting lever disengage wheel gear.
 Detach gear carrier.
 Swivel gear carrier together with wheel. The coupling parts with the rubber packages have to stay at the wheel
gear. If necessary lift wheel carrier with jack or tractors hydraulics.
 Put the drive shaft with the coupling parts on shaft holder which is mounted onto the tower bracing angle.
 Fasten wheel gear carrier with connecting brace (turned by 90°).
22.1.3 MOUNTING THE TOW CABLES ON “-WHEEL CENTRAL UNIT