46
Operating Manual for BAUER LINESTAR 9000 with hose feed
Bring the "SAFETY CIRCUIT ON-OFF" switch to the position "ON".
On the control panel, set the operating mode "LINEAR".
Press the "FORWARD" button to start up the LINESTAR in the "clockwise" (forward) direction.
Press the "REVERSE" button to start up the LINESTAR in the "anti-clockwise" (reverse) direction.
When you have finished the alignment of the machine, set the value in the safety circuit window under the menu
item STEERING SAFETY CIRCUIT back to the default value.
16 TERMINOLOGY
Forward
Looking from the central tower to the system, the LINESTAR moves to the right.
Reverse
Looking from the central tower to the system, the LINESTAR moves to the left.
Inward
Direction central tower
To Next Page
Loading...