16
Operating Manual for BAUER LINESTAR 9000 with hose feed
9.1.1 STANDARD BUILT-IN COMPONENTS
9.1.1.1 MAIN SWITCH
With the main switch the entire power supply is shut on or off.
In position "I" the electric power supply of the machine is established.
The hinged operating panel in this position is locked for safety reasons.
In position “0“ the power supply of the system is turned off.
In this position the main switch can be locked against unintentional switching on.
The hinged operating panel can only be opened in this switch position.
9.1.1.2 CONTROL PANEL LINESTAR PRO
9.1.1.2.1 DISPLAY
2x16 alphanumeric LCD, with backlight. If no key is touched within a preset time, the backlight.turns off
automatically (adjustable backlight timer).
9.1.1.2.2 FUNCTIONS / MENU KEYS
START FORWARD (F) Starts forward run (clockwise)
START REVERSE (R) Starts reverse run (anti-clockwise)
MENU and ENTER By pressing this key you get access to user level; it has got two more functions:
getting access to parameter programming mode and confirming the set data
(memorizing the parameter).
STOP (ESC and Machine) This key stops machine run; it has got two more functions: getting access to expert
level and exiting programming mode (without memorizing the parameter).
+
Multipurpose key: to modify application rates and parameter settings
-
Multipurpose key: to modify application rates and parameter settings
To Next Page
Loading...