Operating Manual for BAUER LINESTAR 9000 with hose feed 15
9 CONTROL CENTRE
9.1 CONTROL CENTRE LINESTAR PRO
Design and material according to ÖVE and VDE standards, built-in components according to IEC standards and
VDE regulations.
Water-proof polyester box (protection IP 54) with lockable front door
Swivelling operating panel, can only be opened after turning off main switch
Operating voltage 400 V
Control voltage: 230 V monophase
Isolating transformer for control voltage
Commercial contactors
Wiring with lugs
Protection devices
ATTENTION!
To protect against soiling and splash water always close the control panel during
operation.
1. Main switch
2. Control panel LINESTAR PRO
3. Voltmeter
4. Switch "LINESTAR OFF - ON“
5. Switch "SAFETY ON – OFF“
6. Switch "ENDGUN OFF - ON“
7. Switch "GENSET OFF – ON”
8. Switch "EMERGENCY STOP”
1
2
3
4 5 6 7
8
To Next Page
Loading...