Bauer LINESTAR 9000 - Towing the Linestar at the End Tower; Swivelling Central Unit Wheels (Proceed According to Item 17.5); Swivelling Tower Wheels

Operating Manual for BAUER LINESTAR 9000 with hose feed 63
 Fasten the clamp on the end pipe of the first tower.
 Fasten the clamp on the wheel base of the central unit.
 Hook up and adjust the cables (the first time).
 Mount drawbar (the first time).
22.2 TOWING THE LINESTAR AT THE END TOWER
22.2.1 SWIVELLING CENTRAL UNIT WHEELS (PROCEED ACCORDING TO ITEM 17.5)
22.2.2 SWIVELLING TOWER WHEELS
Gehen Sie ähnlich wie in 22.1.2 SCHWENKEN DER RÄDER AM FAHRTURM vor.
 Loosen and push back the drive shaft cover at wheel gear
 Loosen driver pin on wheel hub. If wheel gear is provided with shifting lever disengage wheel gear.
 Detach gear carrier.
 Swivel gear carrier together with wheel. The coupling parts with the rubber packages have to stay at the wheel
gear. If necessary lift wheel carrier with jack or tractors hydraulics.
Fasten the wheel gear carrier with steering brace “A” (turned by 90°)
Mount steering device “B” on all towers except for end tower (overhang).