Baumer_PowerlinkV1-01_MA_EN.docx 10/19 www.baumer.com
19.07.2013
7 Service Data
The following table shows the most user-relevant objects. Section 7.1 describes all relevant objects for
configuring the communication behavior. Section 7.2 describes relevant objects for configuring all encoder
specific features.
Format U/I = Unsigned/Integer
No. = Number of bits
ARR = Array
REC = Record
STR = String
BOOL = Boolean
Access ro = read only
wo = write only
rw = read write
const = read only, value is constant
Default default after first initialization
To Next Page
Loading...
