10 | Maintenance Baumer
50 Operating Manual OM20/ OM30 RS485 with Modbus RTU | V1
10 Maintenance
The sensor is maintenance-free. No special maintenance is required. Regular cleaning and reg-
ular checking of the plug connections are recommended.
10.1 Cleaning the sensor
Exterior cleaning
When cleaning the exterior of the sensor, make sure to use cleaning agents that do not affect
the housing surface and seals.
NOTICE
Material damage due to improper cleaning.
Unsuitable cleaning agents and methods can cause leaks and damage the sensor, the seals, or
the connections.
a) Always check the suitability of the cleaning agent for the surface to be cleaned.
b) Do not use scouring agents, solvents, or other aggressive cleaning agents.
c) Do not use jets of liquid for cleaning, for example, a high-pressure cleaner.
d) Do not scrape off contamination with sharp-edged items.
Interior cleaning
No interior cleaning of the sensor is required.
To Next Page
Loading...
