– 17 –
Editing the Recipes
1. With the oven in the OFF mode, press and hold the UP arrow in the STEPS section. While pressing
and holding the UP arrow, press the POWER ON OFF button for 3 seconds. When the beep sounds,
the oven is in recipe mode.
2. Press the RECIPE UP or DOWN arrows until the recipe number that is desired is displayed.
3. Enter the new Bake, Steam and Delay Fan settings:
• Press the UP or DOWN arrows next to BAKE TIMER to enter the desired time.
• Press the UP or DOWN arrows next to STEAM TIMER to enter the desired time. If no time is
needed enter 0.
• Press the UP arrow next to FAN DELAY to enter the desired time. If no delay is required leave
set at 0.
4. To change the settings in a Step, press the UP arrow in the STEPS section and make changes in
each step accordingly.
5. To store the recipe, press the RECIPE UP or DOWN arrows to move to the next recipe number or
press the POWER ON OFF button to exit the recipe mode.