– 18 –
MANUAL MODE
The Manual Mode guides the user through a simplied setup process without using a saved recipe. Manual
Mode can be used for single-step recipes. This can save time and be easier to use than the Auto Mode.
NOTE: The Manual Mode process can be congured in the Client Parameters to operate in Manual or
Classic Manual mode.
• Manual Mode - The user will have access to manually enter temperature, time, steam, fan delay
vent options; change time during bake/cook cycle; save one-step recipes; stop bake/cook cycle
while in process; and end bake/cycle in process.
• Classic Mode - This mode emulates the traditional Baxter controls for ovens. The user will have
access to manually enter temperature, time, steam, fan delay, and vent options, and stop bake/
cook cycle in process.
Using Manual Mode
1. On the user display, touch the
MANUAL button at the top.
2. Touch the Temperature Setting
Display (Fig. 29) to set the desired
temperature. A keypad should be
displayed.
3. Enter the desired temperature
on the keypad (Fig. 30). Touch
the green check mark button
when nished. The Manual Mode
screen should appear with the set
temperature.
Fig. 30
Fig. 29
To Next Page
Loading...
