– 21 –
Data Exchange Screen
The Data Exchange Screen is used to allow the user to import and export various data types via Universal
Serial Bus (USB) drive. Touch the button on the screen for the data parameter to import, export, or view.
Insert the USB drive before touching any buttons. See the table below for information about each data type.
Data
Exchange
Parameter
Additional Information
Recipes Recipes can be imported and exported via a USB drive.
Any existing recipes will be erased that have the same
name. See Smart Touch Perconal Computer (PC) Soft-
ware manual for PC-based recipe management.
Consumptions Consumptions can be exported as a .csv le and viewed
on a computer in Excel or Smart Touch PC Software.
See Smart Touch PC Software manual for instructions.
Photos Photos can be imported and exported via a USB drive.
Importing photos will erase any photo with the same
name. Each image will have two photos saved. One for
the recipe image and one for the welcome screen. See
Smart Touch PC Software manual for PC-based photo
management.
User Manual The FAQ User Manual can be exported and viewed on a
computer or printed.
User Prole The oven’s User Prole can be imported and exported
via a USB drive. User Prole information includes
recipes, photos, client parameters, and maintenance
contacts. See Smart Touch PC Software manual for PC-
based oven management.
Touch the Back Arrow button to return to the Toolbox screen.
Client Parameters Screen
The Client Parameters Screen is used
with default operation settings for the
oven. There are two screens (Fig. 39
and Fig. 40). Touch the Next and Arrow
buttons to navigate through the screens.
Refer to the Parameters Table for details
about each setting.
Fig. 38
Fig. 39 Fig. 40
To Next Page
Loading...
Need help?
General
